Illustration

This is an aftermarket part, not an original manufacturer part. Instrument names and part numbers identify what it fits and replaces; they remain the trademarks of their owners. The manufacturer, country of origin, rated life and warranty are stated in the quote, before you decide anything. If you need the OEM part, say so and I will quote that instead.

Pump and injector spares

Plunger holder for Shimadzu LC-20AD and LC-2010 pumps

Replaces OEM part number: 228-35602-91

Plunger holder for the LC-20AD and LC-2010 pump, cross-referenced to 228-35602-91. The holder is what keeps the plunger square to the seal, and it is the part nobody suspects. A worn or distorted holder lets the plunger run slightly off axis, which wears the seal unevenly and gives you a pump that keeps failing on one channel however many seals you fit. If you are on your third seal in a year on the same head, stop buying seals and look at this instead.

Type: Plunger holder
Fits: Shimadzu LC-10ADvp, LC-20AB, LC-20AD, LC-20ADXR, LC-30AD, LC-2010
Replaces: 228-35602-91
Condition: new
Price: Quoted per order, in Canadian dollars

Request a quote +1 647-919-3041

Before you order: if the instrument is misbehaving, tell me the symptom, not the part number. Lamps and seals get replaced for problems they did not cause. The first look costs nothing, and if this part is not the fix, I will say so.

How buying works, written for procurement →

More for Shimadzu and similar systems

Deuterium lamp for Shimadzu detectors and spectrophotometers, flanged base with a flying lead and a keyed connector.

Detector lamps and light sources

Deuterium lamp for Shimadzu SPD-10A, SPD-20A and SPD-15C

Deuterium lamp for the Shimadzu SPD-10A, SPD-20A and SPD-15C, cross-referenced to 228-34016-02. One lamp covers three detector generations here, which is unusual and worth knowing if you run a mixed stack, because a single spare on the shelf then serves several instruments. These detectors keep a lamp hour counter. Read it before diagnosing anything, and reset it after fitting, or the next person inherits a number that means nothing.

Type: Deuterium
Fits: Shimadzu SPD-10A, SPD-20A, SPD-15C
Replaces: 228-34016-02, 228-34016
RFID chip: No

Price on request

Enquire

Request a quote

Detector lamps and light sources

Deuterium lamp for Shimadzu LC-2010

Deuterium lamp for the Shimadzu LC-2010, cross-referenced to 228-37401-91. The LC-2010 is an integrated system rather than a modular stack, so the detector is not something you can swap out to test against. That makes the lamp energy reading more useful here than on a modular instrument: it is the only cheap way to separate a tired lamp from a dirty flow cell without dismantling anything. Check it, and clean the cell, before you order.

Type: Deuterium
Fits: Shimadzu LC-2010
Replaces: 228-37401-91
RFID chip: No

CA$632

Enquire

Request a quote

Detector lamps and light sources

Deuterium lamp for Shimadzu LC-2030 and LC-2040

Deuterium lamp for the LC-2030 and LC-2040, cross-referenced to 228-63621 and 228-63621-01. Two part numbers appear against this position, so read the one on the lamp being removed rather than ordering by instrument name. These are the i-Series benches, and a related but different lamp fits the M40 and LC-2050, which is the mistake to avoid. If you are not certain, send me a photograph of the old lamp and its label and I will confirm before quoting.

Type: Deuterium
Fits: Shimadzu LC-2030, LC-2040
Replaces: 228-63621, 228-63621-01
RFID chip: No

CA$630

Enquire

Request a quote

Detector lamps and light sources

Deuterium lamp for Shimadzu M40 and LC-2050

Aftermarket deuterium lamp for the Shimadzu M40, LC-2050, cross-referenced to 228-63621-02. Check the cross-reference against the lamp currently fitted before ordering, because these instruments were built in more than one configuration. This detector expects a lamp carrying an RFID tag. The chip is listed in the specification above, and it is worth confirming before you order, because a chipless lamp can be refused by the instrument.

Type: Deuterium
Fits: Shimadzu M40, LC-2050
Replaces: 228-63621-02
RFID chip: Yes

CA$630

Enquire

Request a quote