Skip to main content

Independent. Diagnosis first, parts second.

+1 647-919-3041 [email protected]

Chromkit
Get a quote
Illustration of an inlet filter and frit. Generic drawing, not a photograph of this part. Illustration

This is an aftermarket part, not an original manufacturer part. Instrument names and part numbers identify what it fits and replaces; they remain the trademarks of their owners. The manufacturer, country of origin, rated life and warranty are stated in the quote, before you decide anything. If you need the OEM part, say so and I will quote that instead.

Pump and injector spares

Titanium filter frits for Thermo UltiMate 3000 pumps, 10 per pack

Replaces OEM part number: 6268.0111

Aftermarket titanium filter frits for the Thermo UltiMate 3000 RS and SD pumps, cross-referenced to 6268.0111. A blocked filter starves the pump and shows up as pressure ripple, or as a pump that draws air on one channel. It is cheap, and it is blamed on the column far more often than it should be.

Type
Filter frit, titanium, 10 um, biocompatible, 10/pk
Fits
Thermo UltiMate 3000 RS and SD pumps
Replaces
6268.0111
Condition
new
Price
Quoted per order, in Canadian dollars
Request a quote +1 647-919-3041

Before you order: if the instrument is misbehaving, tell me the symptom, not the part number. Lamps and seals get replaced for problems they did not cause. The first look costs nothing, and if this part is not the fix, I will say so.

How buying works, written for procurement →

More for Thermo Scientific and similar systems

Deuterium lamp for Thermo and Dionex detectors, flanged base with a six-way keyed connector on a flying lead.

Detector lamps and light sources

Deuterium lamp for Thermo UltiMate 3000 VWD

Aftermarket deuterium lamp for the Thermo UltiMate 3000 VWD, cross-referenced to 6074.1110. A variable wavelength detector reads one wavelength at a time, so a lamp that is losing output shows up as rising baseline noise before the energy test fails. This detector expects a lamp carrying an RFID tag. The chip is listed in the specification above, and it is worth confirming before you order, because a chipless lamp can be refused by the instrument.

Type
Deuterium
Fits
Thermo UltiMate 3000 VWD
Replaces
6074.1110
RFID chip
Yes

CA$1,062

Enquire

Request a quote
Deuterium lamp for Thermo and Dionex detectors, flanged base with a six-way keyed connector on a flying lead.

Detector lamps and light sources

Deuterium lamp for Thermo Vanquish VWD and DAD

Aftermarket deuterium lamp for the Thermo Vanquish VWD, DAD, cross-referenced to 6077.1110. A variable wavelength detector reads one wavelength at a time, so a lamp that is losing output shows up as rising baseline noise before the energy test fails. This detector expects a lamp carrying an RFID tag. The chip is listed in the specification above, and it is worth confirming before you order, because a chipless lamp can be refused by the instrument.

Type
Deuterium
Fits
Thermo Vanquish VWD, DAD
Replaces
6077.1110, 6083.1111
RFID chip
Yes

CA$1,062

Enquire

Request a quote
Deuterium lamp for Thermo and Dionex detectors, flanged base with a six-way keyed connector on a flying lead.

Detector lamps and light sources

Deuterium lamp for Thermo Vanquish VH-D1

Aftermarket deuterium lamp for the Thermo Vanquish VH-D1, cross-referenced to 6083.1110. Check the cross-reference against the lamp currently fitted before ordering, because these instruments were built in more than one configuration. This detector expects a lamp carrying an RFID tag. The chip is listed in the specification above, and it is worth confirming before you order, because a chipless lamp can be refused by the instrument.

Type
Deuterium
Fits
Thermo Vanquish VH-D1
Replaces
6083.1110
RFID chip
Yes

CA$1,870

Enquire

Request a quote
Illustration of a detector lamp. Generic drawing, not a photograph of this part. Illustration

Detector lamps and light sources

Tungsten lamp for Thermo UltiMate 3000 VWD

Aftermarket tungsten lamp for the Thermo UltiMate 3000 VWD, cross-referenced to 6074.2000. A tungsten lamp covers the visible and near infrared and runs alongside the deuterium lamp that covers the UV. If the fault appears above roughly 350 nm, this is the lamp to change. This detector expects a lamp carrying an RFID tag. The chip is listed in the specification above, and it is worth confirming before you order, because a chipless lamp can be refused by the instrument.

Type
Tungsten
Fits
Thermo UltiMate 3000 VWD
Replaces
6074.2000, 6083.2000
RFID chip
Yes

Price on request

Enquire

Request a quote