Skip to main content

Independent. Diagnosis first, parts second.

+1 647-919-3041 [email protected]

Chromkit
Get a quote
Illustration of a detector lamp. Generic drawing, not a photograph of this part. Illustration

This is an aftermarket part, not an original manufacturer part. Instrument names and part numbers identify what it fits and replaces; they remain the trademarks of their owners. The manufacturer, country of origin, rated life and warranty are stated in the quote, before you decide anything. If you need the OEM part, say so and I will quote that instead.

Spectrophotometer and AAS lamps

Deuterium lamp for PUXI T6 spectrophotometer

Deuterium lamp for the PUXI T6. This is a single beam bench, which is worth knowing, because a single beam instrument shows lamp ageing sooner and more honestly than a double beam one: with no reference channel to absorb it, drift appears directly in your readings. Warm the instrument up properly and re-zero before you conclude the lamp is finished. If the baseline settles after twenty minutes and holds, you probably have some life left in it.

Check this before you order

L6312-53 is the supplier's own catalogue number. The manufacturer of the T6 does not publish an equivalent part number, so there is no OEM cross-reference to check this against. Send me the number printed on the lamp you are removing and I will confirm the match before quoting.

Type
Deuterium
Fits
PUXI T6
Supplier part number
L6312-53
Condition
new
Price
Quoted per order, in Canadian dollars
Request a quote +1 647-919-3041

Before you order: if the instrument is misbehaving, tell me the symptom, not the part number. Lamps and seals get replaced for problems they did not cause. The first look costs nothing, and if this part is not the fix, I will say so.

How buying works, written for procurement →

More for PUXI and similar systems

Illustration of a detector lamp. Generic drawing, not a photograph of this part. Illustration

Spectrophotometer and AAS lamps

Deuterium lamp for PUXI T9 spectrophotometer

Deuterium lamp for the PUXI TONGYONG T9. The T9 is a double beam bench, so the reference channel masks gradual output loss and the first visible sign is usually noise below 250 nm rather than a shifted baseline. Confirm the lamp fitted against the number on the old one before ordering, because instruments in this family have appeared with more than one source. If the instrument is also being used for a compendial method, verify photometric accuracy after the change rather than assuming it.

Type
Deuterium
Fits
PUXI TONGYONG T9
Supplier part number
L6301-50
Does not fit
L6301-50 is the supplier's own catalogue number. The manufacturer of the T9 does not publish an equivalent part number, so there is no OEM cross-reference to check this against. Send me the number printed on the lamp you are removing and I will confirm the match before quoting.

Price on request

Enquire

Request a quote
Deuterium lamp for Shimadzu detectors and spectrophotometers, flanged base with a flying lead and a keyed connector.

Spectrophotometer and AAS lamps

Deuterium lamp for Shimadzu UV-Vis spectrophotometers

Deuterium lamp for the Shimadzu UV-Vis bench, cross-referenced to 062-65055-05. These are double beam instruments, which hides lamp ageing for longer than a single beam does: the reference beam absorbs some of the drift, so by the time the baseline looks wrong the lamp is usually well past its useful output. The tell is noise creeping up below 250 nm while the visible range still looks clean. Run the instrument's own energy or lamp history check before ordering, and if the noise covers the whole scan the lamp is not your problem.

Type
Deuterium
Fits
Shimadzu UV-3700, 3600, 2700, 2600, 2550, 2450, 1700, 1800, 1240, 1280
Replaces
062-65055-05
RFID chip
No

Price on request

Enquire

Request a quote
Illustration of a detector lamp. Generic drawing, not a photograph of this part. Illustration

Spectrophotometer and AAS lamps

Deuterium lamp for Shimadzu UV-1800 and UV-1900

Deuterium lamp for the UV-1800 and UV-1900, cross-referenced to L6302-40. These benches keep a lamp hour counter, and it is worth reading before you diagnose anything, because a lamp left on continuously accumulates hours far faster than the number of samples suggests. Many labs never switch the source off between runs. If the counter is low and the UV end is still noisy, suspect a dirty cuvette or a fouled window before the lamp. Reset the counter after fitting, or the next person inherits a number that means nothing.

Type
Deuterium
Fits
Shimadzu UV-1800, UV-1900
Replaces
L6302-40

Price on request

Enquire

Request a quote
Deuterium lamp for Thermo and Dionex detectors, flanged base with a six-way keyed connector on a flying lead.

Spectrophotometer and AAS lamps

Lamp for Thermo iCE 3500 AAS

Aftermarket lamp for the Thermo iCE 3500, cross-referenced to 9423-420-30004. A hollow cathode lamp emits the spectral lines of one element, so it is chosen by the element you are measuring and not by the instrument alone. Tell me the element when you enquire. This detector expects a lamp carrying an RFID tag. The chip is listed in the specification above, and it is worth confirming before you order, because a chipless lamp can be refused by the instrument.

Type
AAS lamp
Fits
Thermo iCE 3500
Replaces
9423-420-30004
RFID chip
Yes

CA$1,162

Enquire

Request a quote